Silikomart White Stand for Cake Pops or Mini Ice Cream Pops

Silikomart Pop Stand
Two-part three-tier stand with holes for lollipop sticks and slots for popsicle sticks

• Dimensions 8.9 inch diameter x 4.3 inch high (225.5 mm diameter x 110 mm high)
• Hole size 0.16 inch (4mm)
• Slot size 0.1 inch x 0.3 inch (3mm x 9mm)

Only for lollipop sticks do the two parts of the stand go together: The clear part has 27 holes for lollipop sticks, and on the white part are 27 dents that align with the holes and keep your lollipops upright.

For popsicle sticks, the white part of the stand is all you use, with 28 slots for ice cream pops.

Lollipop-Treat Molds
1. Easy Pop
2. MUL3D128

Popsicle-Treat Molds
1. MST
2. Mini Ice Cream Pop

To attach the two parts of the stand, place the top above the bottom so the ridge at the base of the stand's top (clear) part is parallel to the vertical indentation in the stand's bottom (white) part, then press together. With a click, the prongs of the top part lock onto the slits in the bottom part.

To detach, hold the stand by the top part with one hand and press the prongs together from underneath with the other hand. The top and bottom will come apart.

Shop More Cake Pop & Lollipop Sticks >