The two identical molds in this set are each the PL11 Bubbles mold, and the set comes with a polycarbonate tray.
The Pavogel mold is the easiest and cleanest way to form ice cream pops on a stick.The stick (50 included) is inserted (under the ice cream cavity) in a slot whose section (part of the mold) has a hinge (also part of the mold). The hinged parts are held together by protuberances in one part and holes in the other.
The hinge makes removing the ice cream or ices both easy and sanitary, since the ice cream--once the hinged parts are pulled apart--is unobstructed, letting you lift the ice cream out by the stick and leave the food untouched.
Pavogel mold use
- Fill the Pavogel cavities with the liquid ices or not-yet-frozen ice cream.
- Insert each wooden stick in its slot.
- Even out the ice cream.
- Stick the mold with the ices / ice cream in a blast chiller and freeze for 90 minutes.
- Open the hinge and take out the dessert by the stick.
Volume each cavity 0.7 oz (20ml).
Overall size of each mold 4-5/16 inch x 7-9/16 inch x 7/8 inch high (110mm x 192mm x 22mm high).
Size of polycarbonate tray 4-9/16" x 15-1/2" x 7/16" high (116mm x 394mm x 11mm high).
Each wooden stick 3/8 inch x 2-15/16 inch (10mm x 75mm).
- Tough but supple silicone with temperature resistance of -40 to 536 Fahrenheit (-40 to 280 Celsius)
- Original hinged section for ice cream sticks to facilitate removal of ice cream pop without touching the ice cream
- Polycarbonate tray included
- Packaged with 50 wooden sticks
Dimensions and Weight | |
---|---|
Ounce Capacity | 0.7 |
Features | |
Material | Silicone |
Cavities | 10 |
Dishwasher Safe | Yes |
Maximum Heat Resistance | 536° F |
Oven Safe | Yes |
Shape | Bubbles |