Hablamos
EspaƱol

THE ONE-STOP SHOP FOR CHEFS SINCE 1959

Hobart HCM-450 Vertical Cutter Mixer 45 Quart, Used Excellent Condition

Item # USD-HCM-450(12)MFR: HCM-450
Sold
Available for Shipping
Store Pickup

Please contact us at 718-232-7044 if you are interested in this item. We may have similar items available.

Not Qualified for Free Shipping

    Hobart HCM-450 Vertical Cutter Mixer 45 Quart, Used Excellent Condition
    Tested by in-house technicians

    Quick Facts:
    • Cut, mix and blend in seconds
    • 45-quart bowl with pouring lip
    • Durable steel base
    • Bowl-tilt lever
    • See-through cover
    • 5-H.P. motor
    • On-Off & Jog Switch
    The Hobart Cutter Mixer has a 45-quart bowl and 5-H.P. motor designed for the most demanding operations. Boasting 1,140 rpm, it enables consistent processing of a variety of products. Liquid product can be continuously added to the mix via the pour-through center shaft with the cover closed, and the wide, shallow bowl provides easy access.

    Easy to operate from start to clean.

    The HCM450 has simple Start and Stop switches that are completely sealed and washable for easy cleaning. A five-minute timer includes Jog, Run and Timed settings, with Jog and Run settings giving the operator flexibility for non-timed recipes. A counterbalanced clear Lexan bowl cover seals in liquid product without a rubber gasket while enabling the operator to monitor the mix. But what really makes the HCM450 easy to use is the 90-degree bowl tilt—you simply pour out your product. And that tilt also helps make cleaning a snap.

    Made for the long haul, the bowl, mixing baffle and support bar are stainless steel. The base is steel with a powder-coat finish.
     
    Model HCM450
    Serial No. 31-431-910
    ML 32313-4
    Volts 200
    Amps 23.5
    Hertz 60
    Phase 3
    Horsepower 5
    RPM 1140
    Code J
    MD PL
    Temperature 40C
    Dimensions 38-7/8"W x 22-1/4"D 41-3/4"H
    Shipping Weight 362 lbs

    Cutter Mixer Capacity Chart

    Warehouse tag # k-3843
     


Shop More Hobart >

Product Manual
Spec Sheet

Hobart HCM-450 Vertical Cutter Mixer 45 Quart, Used Excellent Condition
Tested by in-house technicians

Quick Facts:

  • Cut, mix and blend in seconds
  • 45-quart bowl with pouring lip
  • Durable steel base
  • Bowl-tilt lever
  • See-through cover
  • 5-H.P. motor
  • On-Off & Jog Switch
The Hobart Cutter Mixer has a 45-quart bowl and 5-H.P. motor designed for the most demanding operations. Boasting 1,140 rpm, it enables consistent processing of a variety of products. Liquid product can be continuously added to the mix via the pour-through center shaft with the cover closed, and the wide, shallow bowl provides easy access.

Easy to operate from start to clean.

The HCM450 has simple Start and Stop switches that are completely sealed and washable for easy cleaning. A five-minute timer includes Jog, Run and Timed settings, with Jog and Run settings giving the operator flexibility for non-timed recipes. A counterbalanced clear Lexan bowl cover seals in liquid product without a rubber gasket while enabling the operator to monitor the mix. But what really makes the HCM450 easy to use is the 90-degree bowl tilt—you simply pour out your product. And that tilt also helps make cleaning a snap.

Made for the long haul, the bowl, mixing baffle and support bar are stainless steel. The base is steel with a powder-coat finish.
 
Model HCM450
Serial No. 31-431-910
ML 32313-4
Volts 200
Amps 23.5
Hertz 60
Phase 3
Horsepower 5
RPM 1140
Code J
MD PL
Temperature 40C
Dimensions 38-7/8"W x 22-1/4"D 41-3/4"H
Shipping Weight 362 lbs

Cutter Mixer Capacity Chart

Warehouse tag # k-3843
 


Shop More Used Equipment We Have Sold >

Hobart HCM-450 Vertical Cutter Mixer 45 Quart, Used Excellent Condition
Average Customer Rating