Crathco D25 Classic Bubblers premix cold-beverage dispenser
Two 5-gallon clear polycarbonate bowls and lids
Plastic side panels
Plastic drip tray
Stainless steel pouring valves
120 Volts
660 watts
6 amps
Single phase
27-1/4 inch high x 17-1/2 inch wide x 15 inch deep
- Spigots don't drip
- Unit is easy to clean and maintain
- Calibration marks are easy to read
- Two separate bowls allow you to clean and refill one bowl while dispensing from the other
- Bowls and covers are built to withstand impact
- Compressor parts are designed to cool the drinks on startup with little wait*
The wait may increase by a couple of minutes if unit stands by a window under sunlight.
The increase in wait time will be greater if unit is kept in a tight space, above a vent or near an oven.
It can take as long as an hour, however, if your D25 is outdoors in the blazing sun.
To keep your startup wait to a minimum, premix your beverages and keep them cool in a walk-in fridge prior to pouring the drinks into the dispenser bowls.
Dimensions and Weight | |
---|---|
Exterior Width | 17-1/2" |
Exterior Depth | 15" |
Exterior Height | 27-1/4" |
Capacity per Compartment | 5 gal. |
Gallon Capacity | 10 |
Height to Dispenser | 8-1/4" |
Features | |
Material | Plastic |
Number of Compartments | 2 |
Electrical | |
Voltage | 115 |
Amps | 5.5 |
Phase | 1 |
Hertz | 60 |
Horsepower | 1/5 |
Certificate Label | |
NSF Listed | Yes |
CE Listed | Yes |
UL Listed | Yes |